Only shipping to USA and Canada
Free Shipping Over $200 Online
MakerBot METHOD X RapidRinse and ABS-R Filament 4-Pack
$395.00
Do you need help choosing the right 3D Printer for your application or require a quote to purchase?
ABS-R + RAPIDRINSE FAST DISSOLVING SUPPORT MATERIAL
Print dimensionally accurate ABS parts with the ease of PLA. ABS-R provides improved performance and reliability over normal ABS and is exclusively compatible with RapidRinse - a proprietary tap-water soluble support material that dissolves even faster. This bundle lets you sample all three color options of ABS-R and one spool of RapidRinse to get started quickly!
WHAT'S INCLUDED
- 1 spool ABS-R Black
- 1 spool ABS-R Red
- 1 spool ABS-R Natural
- 1 spool RapidRinse
- 1 3-pack Grip-Surface for METHOD
ABS, FINALLY AS EASY AS PLA
ABS is one of the most in-demand yet difficult materials to 3D print. METHOD X patented VECT™ 110 technology combined with proprietary RapidRinse™ support delivers incomparable ABS parts with unprecedented ease.
TAP WATER SOLUBLE
Forget the cumbersome wash tanks and chemicals - RapidRinse™ dissolves in pure tap water so it’s easy to use in just about any environment.
DISSOLVES IN MINUTES
You don’t have time to wait around while your print dissolves, so we’ve engineered RapidRinse™ to dissolve faster than PVA and competitive high-temp dissolvable support materials. There’s really nothing that comes close.
This material is a moisture sensitive material. The spools are shipped in resealable mylar bags, which are impermeable to light and moisture and help protect the filament from potential damage. Within the spool there is also desiccant to keep the environment moisture-free. A moisture sensitive material will run the risk of a high moisture uptake if stored improperly, which can result in decreased print quality and damage to the extruder.
Please reference our guide for working with moisture sensitive material here.
If your material does become exposed to moisture, you can dry it using the METHOD Drying Cycle and this kit.
ABS-R
SPOOL TYPE
Smart Spool™ provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a desiccant in the spool maintains a low moisture level inside the drawer bay.
DIMENSIONS AND WEIGHT
Spool Diameter: 21.8 cm (8.6 in)
Spool Width: 4.2 cm (1.65 in)
Material Diameter: 1.75 mm
Shipping Weight: 1.1 kg (2.4 lb)
Net Weight: 0.65 kg (1.43 lb)
STORAGE ENVIRONMENT
Store in the included a vacuum-sealed metalized polyester bag to avoid moisture absorption from air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.
MATERIAL PROPERTIES
|
Properties |
Test |
ABS-R |
|
Tensile Strength (MPa) |
ASTM D648 |
41 |
|
Tensile Modulus (MPa) |
ASTM D648 |
2400 |
|
Strain at Yield (%) |
ASTM D648 |
2.3 |
|
Strain at Break (%) |
ASTM D648 |
33.4 |
|
Flexural Strength (MPa) |
ASTM D790 |
79 |
|
Flexural Modulus (MPa) |
ASTM D790 |
2600 |
|
Izod Notched Impact Strength (J/m) |
ASTM D256 |
129 – C/H |
|
Izod Unotched Impact Strength (J/m) |
ASTM D256 |
970 - C |
|
Heat Deflection Temperature – 64 psi (C) |
ASTM 648 |
105 |
|
Heat Deflection Temperature – 264 psi (C) |
ASTM 648 |
102 |
RAPIDRINSE
SPOOL TYPE
Smart Spool™ provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a desiccant in the spool maintains a low moisture level inside the drawer bay.
STORAGE ENVIRONMENT
Store in the included a vacuum-sealed metalized polyester bag to avoid moisture absorption from air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.
DIMENSIONS AND WEIGHT
Spool Diameter: 21.8 cm (8.6 in)
Spool Width: 4.2 cm (1.65 in)
Material Diameter: 1.75 mm
Net Weight: 0.45 kg (1.0 lb)
ABS-R
Printers:
- METHOD X
- METHOD X Carbon Fiber*
Extruders:
- Model 1XA Extruder
- LABS GEN 2 Experimental Extruder
*Requires purchase of compatible extruder
RAPIDRINSE
Printers:
- METHOD X
- METHOD X Carbon Fiber*
Extruders:
- Model 2XA Extruder