Shop 33% off Method 3D printers here.

Toggle Nav
  • 3D Printers
  • Materials
  • Extruders
  • Parts & Accessories
  • Support

Shop 33% off Method 3D printers here.

My Cart

MakerBot Nylon Specialty Model Material for METHOD

As low as $72.00

 

Do you need help choosing the right 3D Printer for your application or require a quote to purchase?

Contact MakerBot

NYLON SPECIALTY MATERIAL

HIGH ABRASION RESISTANCE FOR INDUSTRIAL APPLICATIONS.
Nylon’s ability to withstand high temperatures and its durability combine to give it above average abrasion resistance. Thus it is an excellent material for replacement parts in a manufacturing facility or distribution center.

 

SPOOL TYPE
Smart Spool™ provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a desiccant in the spool maintains a low moisture level inside the drawer bay.

 

STORAGE ENVIRONMENT
Store in the included a vacuum-sealed metalized polyester bag to avoid moisture absorption from air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.

 

SKU: 375-0033A

 

WARNING for California Residents Only

WHAT'S INCLUDED:

1 Nylon Material Spool (1.54 lb)


This material is a moisture sensitive material. The spools are shipped in resealable mylar bags, which are impermeable to light and moisture and help protect the filament from potential damage. Within the spool there is also desiccant to keep the environment moisture-free. A moisture sensitive material will run the risk of a high moisture uptake if stored improperly, which can result in decreased print quality and damage to the extruder.


Please reference our guide for working with moisture sensitive material here.

If your material does become exposed to moisture, you can dry it using the METHOD Drying Cycle and this kit.

 

 




MATERIAL DATA

  • Heat Deflection @ 66 psi - ASTM 648: 91°C (196°F)
  • Flexural Modulus (ASTM D790, 15 mm/min): 1,700 Mpa (250,000 psi)
  • Tensile Strength at yield (ASTM D638, 50 mm/min): 66 Mpa (9,570 psi)
  • Tensile Modulus (ASTM D638, 50 mm/min): 2,200 MPa (319,000 psi)
  • Strain at Yield - Elongation (%): >10%
  • Notched Impact Strength (ASTM D256): 187 J/m (3.5 ft-lb/in)

DIMENSIONS AND WEIGHT

  • Spool Diameter: 21.8 cm (8.6 in)
  • Spool Width: 4.2 cm (1.65 in)
  • Material Diameter: 1.75 mm
  • Shipping Weight: 0.96 kg (2.3 lb)
  • Net Weight: 0.7 kg (1.54 lb)

PRINTER COMPATIBILITY

  • METHOD 3D Printer
  • METHOD X 3D Printer*
  • METHOD X Carbon Fiber 3D Printer

EXTRUDER COMPATIBILITY

  • Model 1A Extruder
  • Model 1C Extruder
  • LABS GEN 2 Experimental Extruder

COMPATIBLE SUPPORT MATERIALS 

  • PVA

 

*Requires purchase of compatible extruder