When you order four
or more Large or 1 kg
spools of MakerBot
PLA or ABS Filament!
MakerBot PLA Filament
Translucent Orange
Select Your 3D Printer

Pick your machine and available colors
and spool sizes will be made available


MakerBot PLA Filament

MakerBot PLA Filament is the best and most consistent
filament for the MakerBot Replicator 2 Desktop 3D Printer.
MakerBot PLA Filament Spool
MakerBot PLA Filament is a bioplastic derived from corn.
It's guaranteed not to have any heavy metals, phthalates or BPA.
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.
If you’re new to 3D printing, MakerBot PLA Filament is a good material to start with because it’s easy to use and performs well on most prints.

MakerBot PLA Filament adheres well to acrylic and to MakerBot Build Plate Tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.
Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.

Be sure your build plate is level, clean and oil-free before printing.

Technical Specifications

Dimensions & Weights

Small
Large
XL
XXL
1 kg
Spool Diameter
15.0 cm
(5.90 in)
25.0 cm
(9.84 in)
21.59 cm
(8.50 in)
21.59 cm
(8.50 in)
20.32 cm
(8 in)
Spool Width
4 cm
(1.57 in)
4 cm
(1.57 in)
8.89 cm
(3.50 in)
17.78 cm
(7 in)
7.62 cm
(3 in)
Spool Hub Hole
5.08 cm
(2 in)
5.08 cm
(2 in)
2.54 cm
(1 in)
2.54 cm
(1 in)
5.08 cm
(2 in)
Filament Diameter
1.75 mm
1.75 mm
1.75 mm
1.75 mm
1.75 mm
Shipping Weight
0.45 kg
(1 lb)
1.36 kg
(3 lb)
2.72 kg
(6 lb)
4.99 kg
(11 lb)
1.36 kg
(3 lb)
Net Weight
0.22 kg
(0.50 lb)
0.9 kg
(2 lb)
2.26 kg
(5 lb)
4.53 kg
(10 lb)
1 kg
(2.2 lb)
With MakerBot Filament Case

Compatibility

Small
Large
XL
XXL
1 kg
Replicator 2
and Earlier Models
Replicator Mini
Replicator
5th Generation Model
Replicator Z18

Temperatures

Glass Temp
60~65° C (140~149° F)

Melting Temp
150~160° C (302~320° F)

Nozzle Temp
230° C (446° F)