Check items to add to the cart or select all
Product Description
Welcome to the MakerBot® Cupcake Heated Build Platform v2.0 Kit for the CupCake CNC!
No longer will your prints be thwarted by the evil incarnation of plastic physics: CURLING!
Curling happens when layer upon layer of plastic cools down on top of each other and shrinks a small percent. This shrinkage builds up layer after layer and the edges of the printed object start to curl up!
The heated build platform greatly reduces curling by keeping the temperature of the base of the object at a steady 110C.
Assembly Required: Please read the full instructions on the MakerBot® wiki: http://wiki.makerbot.com/cchb1
***if your CupCake CNC was purchased prior to 9/09 (Batches 1-4), please contact us when ordering this item***
Check out the designs on Thingiverse®: http://www.thingiverse.com/thing:2041/
We are also going to try something new with this project. We're going to use our forums for support. Here's the forum for this project:
http://wiki.makerbot.com/forum/t-229036/makerbot-cupcake-heated-build-platform-v2-0#post-731781
Big thanks to Jordan Miller for his early support and research into heated build platforms. Thanks also to Nophead for his pioneering research into heated platforms and his work identifying appropriate materials to for printing on.
Warning: this board draws a large amount of current that can cause the MOSFET on your extruder controller to overheat. We recommend getting the Relay Board Kit which will offload the current requirements from the extruder controller.
No longer will your prints be thwarted by the evil incarnation of plastic physics: CURLING!
Curling happens when layer upon layer of plastic cools down on top of each other and shrinks a small percent. This shrinkage builds up layer after layer and the edges of the printed object start to curl up!
The heated build platform greatly reduces curling by keeping the temperature of the base of the object at a steady 110C.
Assembly Required: Please read the full instructions on the MakerBot® wiki: http://wiki.makerbot.com/cchb1
***if your CupCake CNC was purchased prior to 9/09 (Batches 1-4), please contact us when ordering this item***
Check out the designs on Thingiverse®: http://www.thingiverse.com/thing:2041/
We are also going to try something new with this project. We're going to use our forums for support. Here's the forum for this project:
http://wiki.makerbot.com/forum/t-229036/makerbot-cupcake-heated-build-platform-v2-0#post-731781
Big thanks to Jordan Miller for his early support and research into heated build platforms. Thanks also to Nophead for his pioneering research into heated platforms and his work identifying appropriate materials to for printing on.
Warning: this board draws a large amount of current that can cause the MOSFET on your extruder controller to overheat. We recommend getting the Relay Board Kit which will offload the current requirements from the extruder controller.
You may also be interested in the following product(s)
|
MakerBot® Unicorn Pen Plotter Kit
$85.00
|
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
