DIY Kits
-
Relay Board Kit v1.0
This little powerhouse can help run all the extras on your Bot without drawing all the power through your extruder controller and motherboard. It accepts a standard ATX power supply plug, and runs the juice to whatever items need it (HBP's, LED's, PCB's, whatever!) This easy-to-solder kit includes two mechanical relay switches, that can deliver enough power to run your Heated Build Platform and another add-on all day, with no extra strain on your extruder controller.
$17.50 -
openVolver Kit
The openVolver is a wearable grid of 36 diffused LEDs with 255 levels of brightness! The animation patterns are user programmable on any desktop platform with frame by frame animation software, and comes with 4 built-in animation modes, a microSD card, and a clear plexiglass holder.
$82.00 -
Opto Endstop v2.1 Kit
An optical switch usually used to detect when your robot has reached the minimum or maximum position of travel.
$10.00 As low as: $7.85Out of stock
-
Brain Machine Kit
Mitch Altman's Brain Machine. This is the most awesome party/meditation kit ever~ This kit will change your life! Relax and rejuvenate as your brain synchronizes to a wonderful meditative state, and enjoy as you hallucinate beautiful colors and patterns from your subconscious mind! The Brain Machine provides you with a fun, easy way to meditate, all the while being very photogenic! They work with lights and sounds that pulse at a 14-minute-long meditation sequence of brainwave frequencies. Your brain synchronizes to this meditation sequence, and you meditate. It's that easy! And the beautiful colors and patterns you vividly imagine along the way make it fun and enjoyable. The Brain Machine works with blinking lights. Be aware that blinking lights are not good for some people, especially those prone to seizures! Build your own Brain Machine to expand your brain's technical skills, then lean back and enjoy the light show. They are a blast at parties, a fun way to practice meditation and trip out.
Regular Price: $30.00
Special Price: $21.00
Out of stock -
Open Heart Kit
A fun soldering project from Jimmie P Rodgers. It's the programmable Open Heart LED Kit! The Open Heart is an LED matrix of individually addressable LEDs. It can be used to create a broach or bag light with highly customizable animations. It can be configured so that you can temporarily attach it to fabrics with headers that you simply push through, or you can sew it into a project using conductive thread/wire for a more permanent setup. I have also created a simple flash programmer that you can design animations with, and it will generate the Arduino code for you. That way you just copy, paste, upload, and enjoy.
Regular Price: $18.00
Special Price: $12.00
-
LOL Shield Blue
A fun LED Programming Shield for Arduino from Jimmie P Rodgers. Simple to build, with lots of great effects to create in software! The LoL Shield is a charlieplexed LED matrix for the Arduino. The LEDs are individually addressable, so you can use it to display anything in a 9X14 grid. Scroll text, play games, display images, or anything else you want to do.
$35.00
-
Video Game Shield Kit
Wayne and Layne's Video Game Shield for Arduino! The Video Game Shield is an Arduino add-on shield to make your own video games, including graphics, text, sound effects, and music! Using the power of open source, this Shield includes everything you need to make awesome black-and-white video games on your TV. It supports up to two Nintendo Wii Nunchuck controllers for an easy and familiar interface. Do you need to output text, graphics, or audio through RCA jacks to a TV? Do you need to work with two Nunchucks at the same time? You can do both of these things with Wayne and Layne’s Video Game Shield.
Regular Price: $22.50
Special Price: $15.00
-
Evil Mad Scientist Larson Scanner Kit
The One and only Evil Mad Scientist Larson Scanner Kit The kit is very easy to build, and includes a pre-programmed microcontroller, battery holder, and nine ultrabright red LEDs. Once you've built it, you'll have a beautiful back-and-forth scanning red light, ready for incorporation into various sci-fi props, costumes, and pumpkins. This kit comes with 10 mm (huge LEDs) with diffused lenses. The Larson scanner is named after Glen A. Larson, the man responsible for producing both the original Battlestar Galactica and Knight Rider television shows.
$13.00 -
Type K Thermocouple
Type K Thermocouple
$16.00
-
MakerBot® Magnetic Linear Encoder v1.2 Kit
A Magnetic Linear Encoder v1.2 Kit that can determine position down to 15 Microns. That's a tiny position! Great for your machine, robotics, or hacking projects! The MakerBot® Magnetic Linear Encoder v1.2 is a fantastic building block for positioning systems. The core of this board is the AS5306 chip. This chip is what is commonly called an encoder. What is does is measure and report its location. It does this by reading the changes in the magnetic field as the chip changes position. What this means is that when properly assembled, this board will allow you to detect the the position of something like a linear axis. If you combine this with a motor and a microcontroller, then you can build a closed-loop positioning system whose speed and position can be precisely determined and controlled. You can use it to build machines, or use it as a sensor for sliders, like a mixing board. Can be connected in multiple to Arduino.
$50.00 -
MakerBot® Safety Cutoff Switch Kit
MakerBot® Safety Cutoff Switch Kit
$22.00Out of stock -
MK6 Plus Cartridge Heater 40W @ 12V with Strain Relief
MK6 Plus Cartridge Heater 40W @ 12V with Strain Relief
$28.00Out of stock
-
MK6 Plus Safety Thermostat
Specifications: THERMOSTAT 140 DEG C NC W/LEADS Category: Circuit Protection Family: Temperature Regulators Series: F20 Circuit: Normally Closed Switching Temperature: 284°F (140°C) Package / Case: TO-220 Mounting Type: Through Hole Lead free / RoHS Compliant Datasheet available here
$8.00 -
Molex Y Splitter
Connects to your ATX power supply to add power connectivity. This particular adapter connects to a molex from your power supply and changes it into two molexes.
$5.00 -
Thermocouple Sensor v1.0 Kit
Need to measure crazy high temperatures accurately and reliably? Want a super simple board to handle it? Look no further. This is a simple board for measuring temperature. It uses an AD595 chip to make thermocouple measurements easy. The AD595 amplifies the thermocouple signal and conditions it for easy use. Thermocouples are great due to their linearity over a large range, and their high temperature capability (up to 1300C!) Click here for full documentation and sources.
$49.00
-
Arduino Breakout Shield v1.4 Kit
Simplify your prototyping and make your installation projects much more robust with this awesome breakout shield. Screw terminals FTW. The Arduino Breakout Shield is a shield that plugs into an Arduino and provides all the Arduino pins as screw terminals. It is perfect for semi-permanent Arduino projects, or just general prototyping. It provides access to all the Arduino pins, as well as providing extra GND, 3.3v, 5v, and Supply voltage pins for convenience.
$25.00 As low as: $18.75 -
Temperature Sensor v2.0 Kit
Want a cheap, simple way of measuring temperature in the range of 0-300C? We have the solution for you! This board allows you to use a thermistor to measure the temperature of something. It is designed to be used to measure things in the range of 100C - 300C, but with the proper calibration and resistors, it can be adapted to any temperature range you need (under 300C). If you need something that can measure temperatures above 300C, you should look into the Thermocouple Sensor.
$10.00Out of stock



