Thing-O-Matic
-
Aluminum Build Surface for Thing-O-Matic®
An aluminum build surface with countersunk mounting holes for a fully flush build surface!
$8.75Out of stock -
StepStruder® MK7 Complete Kit (10 Day Lead Time)
It's the MakerBot® StepStruder® MK7 extruder! The most compact MakerBot® extruder yet- exclusively for use with 1.75mm MakerBot® Filament. Designed from scratch, the StepStruder® MK7 contains a number of newly created custom manufactured parts. The MK7 redesign rolls in all the innovations and user experience from the MakerBot® Plastruder MK5, StepStruder® MK6, and StepStruder® MK6 Plus into one cutting edge, pint size device! The StepStruder® MK7 is compatible for use with MakerBot® Generation 4 Electronics and the MakerBot® Thing-O-Matic® 3D Printer.
$199.00Out of stock -
Kapton SuperWide Tape 120mm x 22m
A "SuperWide" roll of our classic Kapton tape! 120mm wide by 22 Meters long! It's all the great features of Kapton tape in an extra-wide roll that will cover build surfaces in a flash. It's the exact horizontal width of the MakerBot® Heater Board v1.1, so with just two cuts, you've got a fresh Kapton surface and you're back to printing. Easy! Great for heated applications, and insulating electrical joints and heating elements. It has tons of uses and is easy to clean up when you remove it. We know MakerBot® Operators really like our regular Kapton tape sizes, so this is just more of a good thing! This tape is 120mm wide, and the roll is 22 meters long. It's probably enough Kapton to keep you supplied for weeks, even under a demanding production schedule.
$25.00Out of stock
-
Thing-O-Matic® ABP/HBP Wire Harness
MakerBot Thing-O-Matic Heated Build Platform and Automated Build Platform Wire Harmess. This is a replacement cable for the Thing-O-Matic Heated Build Surface and Automated Build Platform. If you need to replace your wiring harness for any reason, this is the part you need. 32" long. Compatible with the MakerBot Heated Build Platform Kit.
$7.50Out of stock -
1 Meter LED Stripe Red
A 1 meter string of pre-made bright red LED lights on a sticky flexible circuit! These are flexible adhesive-backed LED stripes. You can peel off the sticker backing and stick them on to practically anything. Believe me when I say these stripes are BRIGHT! We went for brightness and bold colors that look really sharp. The light is nice and steady, and they come pre-attached to a couple of lead wires perfect for plugging into the spare 12v output from the ATX power supply. You can bend them to stick right to the inside (or outside) of your Bot, and they light up like the disco mothership has landed. Going for the vampire look? Go with red! Feeling more like Tron? Go with blue! I've covered my Bot with all five colors to create an effect so dazzling that I’m required by law to discharge an air horn before I turn it on.
$24.00 -
1 Meter LED Stripe Green
A 1 meter string of pre-made bright green LED lights on a sticky flexible circuit! These are flexible adhesive-backed LED stripes. You can peel off the sticker backing and stick them on to practically anything. Believe me when I say these stripes are BRIGHT! We went for brightness and bold colors that look really sharp. The light is nice and steady, and they come pre-attached to a couple of lead wires perfect for plugging into the spare 12v output from the ATX power supply. You can bend them to stick right to the inside (or outside) of your Bot, and they light up like the disco mothership has landed. Going for the vampire look? Go with red! Feeling more like Tron? Go with blue! I've covered my Bot with all five colors to create an effect so dazzling that I’m required by law to discharge an air horn before I turn it on.
$24.00
-
1 Meter LED Stripe Yellow
A 1 meter string of pre-made bright yellow LED lights on a sticky flexible circuit! These are flexible adhesive-backed LED stripes. You can peel off the sticker backing and stick them on to practically anything. Believe me when I say these stripes are BRIGHT! We went for brightness and bold colors that look really sharp. The light is nice and steady, and they come pre-attached to a couple of lead wires perfect for plugging into the spare 12v output from the ATX power supply. You can bend them to stick right to the inside (or outside) of your Bot, and they light up like the disco mothership has landed. Going for the vampire look? Go with red! Feeling more like Tron? Go with blue! I've covered my Bot with all five colors to create an effect so dazzling that I’m required by law to discharge an air horn before I turn it on.
$24.00
